- Specification
- Features
- Installation Instructions
1.Total rated voltage: 51.2VAC,
Total rated power: 204.8W,
Rated current:4.0A,
Total resistance: 14.4 Ω±5% (R12.16~13.44Ω),
Power density: 0.11W/cm²;
Single-chip heating plate rated voltage: 25.6V,
Single-chip heating plate rated power: 102.4W, rated resistance: R6.4±5%Ω (R6.08~6.72Ω);
2. The main cross-sectional structure of the heating plate is divided into: silicone skin (0.75mm), heating wire, silicone skin (0.75mm), tesa 60977 double-sided adhesive total thickness: 1.6±0.2mm;
3. The working temperature range of the heating plate: (within 2 hours) -40℃～45℃.
4. Wire specifications: UL3135 AWG18# red silicone wire, high temperature resistant conductor,
white fiberglass sheath, moderate wire diameter;
5. Withstand voltage: AC1800V, Leakage current≤10mA, 5 seconds, no flash breakdown;
6. Insulation performance: >100 MΩ, @DC 1000V;
7. Flame retardant performance: in line with UL 94 V-0 standard (heating film body);
8. All materials comply with RoHS requirements;
Packing list:1*Heating pad ,1*Adapter cable
1.Fire proof materials:
The entire product is made of fireproof materials. The heating part of the heating pad is covered with fireproof silicone. The conductive circuit is a high-temperature resistant silicone wire, and the outside is wrapped with a high-temperature resistant glass fiber tube.
2.Automatic temperature control:
The conductive circuit of the heating pad is connected in series with a 45℃ normally closed temperature control switch to ensure that the heating pad will not fail due to over-temperature and out of control, causing danger. At the same time, you can set the heating working range of the heating pad on the JK BMS app to realize the automatic operation of the heating pad.
3.Easy installation:
Simply place the heating pad on the bottom of the battery box before assembling the battery, and then connect the two corresponding ports to complete the installation. When you do not need to use the heating pad, you do not need to remove it, just turn off the heating function on the JK BMS app.
Click to download： JK BMS Heating Pad Instructions
Please follow the instructions to install and use the JK BMS heating pad. This heating pad is not suitable for other BMS.
Warning:
1. Please use this heating pad in a dry place to avoid danger caused by short circuit.
2. Keep away from sharp objects to avoid damage to the internal circuit of the heating pad.
3. This product is only designed for JK 48V battery box. Please do not modify it for other purposes without authorization. If an accident occurs, our company will not be responsible.
EEL Upgraded V5 JK Battery Box
Features of V5 version
1. The box is fully reinforced.
2. Replaced with 250A fuse,
3. Added quick fire extinguisher, safer and more assured.
4. Use terminals that can carry 300A current
5. The internal connection copper bar is thickened and the conductivity is further enhanced.