EEL 12V JK BMS heating pad,suit foer EEL 12V DIY battery box,providing useful heating funion.

EEL 12V/24V V19 JK BMS Heating Pad For JK DIY Battery Box

For 12V Battery

$22.00

EEL 12V/24V V19 JK BMS Heating Pad For JK DIY Battery Box

$22.00

Reliable shipping

Flexible returns

Specification:

Rated voltage of single heating film: 14.4V DC,
Rated power of single film: 43.2W, current 3A,
Resistance R4.8Ω±5%Ω(R4.56~5.04Ω);
Power density is about 0.092w/cm²
12V JK heating pads can be connected in series to become a 24V JK heating p2ad, suitable for EEL 24V JK battery kit.
The main cross-sectional structure of the diaphragm is divided into: silicone skin (0.75mm), heating wire, silicone skin (0.75mm), 3M55236 double-sided tape (0.14mm),
Total thickness is about 1.64±0.2mm;
The upper and lower structural layers are firmly pasted, and no cracking shall occur within the warranty period;
The surface of the heating film is clean, without damage or scratches, burrs or burrs, the heating element is not dirty, and the surface of the solder joint is guaranteed to be flat without sharp protrusions;
The operating temperature range of the heating film: (within 2 hours) -40℃～150℃ (the highest heating temperature is 180℃);
Wire specification: UL3135 AWG18# Red silicone wire, high temperature resistant wire, multi-core soft.
Voltage resistance: AC1800V, leakage current ≤10mA, 5s, no flash breakdown;
Insulation performance: >100 MΩ, @DC 1000V;
Flame retardant properties: meet UL 94 V-0 standard (heating film body);
All materials meet RoHS requirements.

What are the features of EEL JK BMS heating pad?

1.Fire proof materials:

The entire product is made of fireproof materials. The heating part of the heating pad is covered with fireproof silicone. The conductive circuit is a high-temperature resistant silicone wire, and the outside is wrapped with a high-temperature resistant glass fiber tube.

2.Automatic temperature control:

The conductive circuit of the heating pad is connected in series with a 40℃ normally closed temperature control switch to ensure that the heating pad will not fail due to over-temperature and out of control, causing danger. At the same time, you can set the heating working range of the heating pad on the JK BMS app to realize the automatic operation of the heating pad.

3.Easy installation:

Simply place the heating pad on the bottom of the battery box before assembling the battery, and then connect the two corresponding ports to complete the installation. When you do not need to use the heating pad, you do not need to remove it, just turn off the heating function on the JK BMS app.

Precautions for use

Please install and use the JK BMS heating pad according to the instruction manual. This heating pad is not compatible with other BMS systems.

⚠️WARNING:

1. Use this heating pad in a dry place to avoid short circuits and potential hazards.

2. Keep away from sharp objects to avoid damaging the internal circuitry of the heating pad.

3. This product is only compatible with JK 12V/24V battery boxes. Unauthorized modification for other purposes is prohibited. Our company will not be responsible for any accidents that may occur.

✅User Manual Download:

Frequently Asked Questions

1. My BMS is not a JK BMS, can I use this heating pad?

Answer: This heating pad is specially designed for 12V/24V JK 4-8S BMS. The heating function of other BMS may not be suitable for this heating pad. Unauthorized connection and use may cause safety accidents, please do not try.

2. How do I know if my battery is suitable for using this heating pad?

A: This heating pad measures 285 mm in length, 165 mm in width, and 2 mm in thickness. Simply place it firmly against the bottom of the battery and ensure it is kept warm.

3. Does this heating pad have any safety protection measures? Are there any safety hazards?

Answer:A: The outer material of our heating pads are all flame-retardant materials. And it has two protection measures. The first is the temperature protection inside the BMS. When the temperature reaches the limit value, the BMS will cut off the power supply of the heating circuit; the second is that we have connected a temperature control switch in series in the heating circuit. When the internal temperature control of the BMS fails, it can still cut off the circuit in time to ensure the safety of the battery.

4. How is the heating effect of this heating pad? Can it heat the battery normally?

Answer: The design rated power of this heating pad is 43.2w. After actual testing, it can heat the battery to 40 degrees Celsius in an hour, so there is no problem in restoring the battery to normal operation.

Account